Spring tension changes by turning hardware that holds the full twist of the spring, and a slipped tool strikes hard. Leave every screw, cone and bracket on the springs alone, and keep children away from the header.
Service · Garland, TX
Garage Door Spring Adjustment in Garland, TX
Your garage door drifts down from halfway, climbs on its own when you let go, or slams shut hard against the slab. A garage door spring adjustment corrects that balance by changing spring tension, and tension is stored energy that hurts anyone who handles it without winding bars and training. Leave every spring and set screw alone, and call about the balance of your Garland garage door.
What you are seeing
A door that won't stay where you leave it
A balanced door stays at any height you leave it. A door out of balance drifts on its own, and the direction of the drift tells you which way the tension went.
- Sinks from halfway
Too little tension lets the weight win.
- Climbs when released
Too much tension lifts the door unaided.
- Slams shut
The door lands hard instead of settling.
- Uneven sides
One side leads when the door moves.
- Opener cutting out
The opener quits at the same spot with every pass.
Safety protocol
Tension is not an owner's adjustment
If a tool or spring strikes anyone, call 911 first.
Loss risk
What an unbalanced door wears out
An out-of-balance door makes the opener work against the springs, and the damage shows in the parts that move it.
- Opener strain
The motor and arm push against uneven lift with every pass.
- Hard landing
A door that slams breaks its bottom section and flattens its seal.
- Stressed cables
One cable carries more than the other.
- Failed reverse
A door at the wrong balance may not back off an obstruction.
Leave the springs, the screws and the cables alone, then call about the door's balance.
(817) 330-7674Local detail
A drifting door in a Garland garage
A door that climbs on its own or slams shut is a hazard for children and pets in a Garland garage. Keep them clear of the door, and call about the balance.
Property type
When tension is not the problem
Tension drifts as springs age and cables settle, but changing it only helps a spring with life left in it. A spring that has stretched, rusted or split needs replacing, because tightening it only hides the wear.
A balance test shows which of the two your door needs, because a settled cable and a stretched spring can both pass for loose tension.
Repair scope
What balancing a door involves
Balancing begins with how the door holds, and the tension follows from what the test shows. The same work checks the cables, the drums and the bottom seal for damage that poor balance caused.
- Balance test
With the opener disengaged, the door's hold shows which way it drifts.
- Tension set
The trade turns the spring to the door's weight, under control.
- Cables compared
Both sides get checked so the lift stays equal.
- Reverse proven
The door backs off an obstruction after the change.
Service sequence
From a drifting door to a steady one
Door left alone
You stop using the door and keep your hands off the springs.
Balance read
The test shows the direction and the amount of the drift.
Tension set
The springs come to the door's weight, or the spent ones change.
Safety run
The door holds at any height and reverses on an obstruction.
Triage order
Why an unbalanced door needs a call early
A door that drifts works against its own springs, and the motor and cables pay for it on each cycle. A door that slams also shakes its panels loose, so a drift left alone becomes a bigger repair. Call from Garland or anywhere in Dallas County and let the trade set the tension.
Service area
Garland ZIP codes
- 75040
- 75041
- 75042
- 75043
- 75044
- 75045
- 75046
- 75047
- 75049
Every responding technician is independent. Before work begins, confirm the technician's license, insurance and pricing with them directly.
Common questions
Garage door spring adjustment questions in Garland
Why does my door drift down?
The springs no longer hold the door's weight, so it settles toward the slab. Aging or stretched springs are a common cause.
Can you tighten the springs yourself?
No. Spring tension holds enough force to injure, and the work takes bars and training.
Will an adjustment fix a worn spring?
Only if the spring has life left. A split or stretched spring needs replacing.
Why does the door rise by itself?
The tension sits higher than the door's weight needs, so the springs lift it unaided. A door like that can also slam open into the stops.
A door held by a broken spring is a door waiting to drop.
Call from Garland before a broken spring or cable strips the opener or bends the sections.